Programming remote in DIRECT TV Philips: importance of knowing DIRECT TV Philips remote codes

DIRECT TV PhilipsAre you using Philips receiver for DIRECT TV, Americas top satellite broadcast service provider, and can’t control TV with remote? Then it will be very helpful for you to implement certain steps for TV code programming which essentially will require using DIRECT TV Philips remote codes.
When you want to correlate your TV and DIRECT TV Philips remote control, if already not correlated, you will need to implement several actions which will ensure proper control of your remote over your TV. The main problem with not knowing the code is that it will require you to implement long and not very easy steps to accomplish control. It will definitely make you bored. We also need to mention that with knowing DIRECT TV Philips remote codes success is guaranteed, while it is not fully guaranteed in contrary case.
Different DIRECT TV Philips product lines have different remote codes, so make sure you use the right DIRECT TV Philips remote code that is given in product’s user manual book. The control can be implemented by using following simple steps.
First of all remember the control codes for your DIRECT TV Philips, which you will use later during the process. When your TV is ON, switch the mode to “TV” mode from “Switch Mode”. The next step will be pressing and holding of buttons “MUTE” and “SELECT” on remote control, which eventually will result in glittering green light on remote. Wait until the light flashes two times and after that immediately release those buttons. Pop-up window will appear on the screen, where you will need to write the DIRECT TV Philips remote codes that you got from user manual. After the code is written correctly, green light will glitter again and as before wait until the light flashes twice and then immediately turn OFF the TV by remote. The operation is accomplished now.
To verify your success check if you can control turning and volume of the TV. If you can, the operation is successful. Now the mode should be changed from “TV” mode to “DIRECT TV” mode in order to operate DIRECT TV Philips. When we do not know the DIRECT TV Philips remote codes for our DIRECT TV Philips brand, there will be step where you will need to perform scan for the all possible codes. This takes time, given that success is not guaranteed. It shows that knowing DIRECT TV Philips remote codes is important.

Article Source